IH Chemical centrifugal pump
AFB Corrosion-resistant
LQF-LQFZ Corrosion-resistant
CQ Magnetic force pump
ZCQ Suck the magnetic
CQB Magnetic force pump
CQB-F-CQG Magnetic force pump
DBY-QBY Diaphragm pump
FSB Leave hesrt pump
IHF Line with Fluorine
PF Corrosion-resistant
PWF Corrosion-resistant
WSY、FSY Under the liquid
FS Glass fibre reinforced plastic
G Spiral shell's pole
I-1B Dense thick liquid

 

 
you place > Home > Products
 
★ Chemical pump G Spiral shell's pole
 
The products are summed up: The single spiral shell's pole is according to widely different new-type pump kind that is transfered to the meshing volume type principle work, the groundwork part is partial spiral shell's pole (rotor ) and regular bush (stator ). Because two special geometry form of part this, form is it hold to sealing independent separately, the medium is pursued evenly by the axial and flowed, the inside velocity of flow is low, the volume keeps intact, the pressure is steady, therefore will not produce the vortex and stir
Move . The output pressure of each grade pump is 0.6Mpa, lift 60m (branch water), suck the height generally in 6m by oneself, suitable for sending medium temperature under 80 degrees Centigrade (special demand can be up to 150 degrees Centigrade). Because stator select for use many kinds of elastic material make , so to high viscidity transport and contain hard quality suspend particle medium or transport with fibre medium of fluid the pump, there is one kind of characteristics that can't be competent of general pump. Its flow is in direct proportion to rotational speed. The transmission can adopt the shaft coupling to transmit directly , or adopt and adjust the speed electrical machinery, the trigonometry is taken, such devices as the gearbox ,etc. change speed. This kind of pump part is few, the structure is compact , small, it is simple and convenient to maintain, rotor and stator are quick-wear parts of a pump, of simple structure, it is easy to put and dismantle.
 
Type meaning:
 
Performance parameter :
type speed
(r/min)
flow
(m3/h)
Pressure
(Mpa)
(Kw) filt
(m)
Suck
(mm)
Discharge
(mm)
G20-1 960 0.8 0.6 0.75 60 Dy25 Dy25
G25-1 960 2 0.6 1.5 60 Dy32 Dy25
G25-2 960 2 1.2 2.2 120 Dy32 Dy25
G30-1 960 5 0.6 2.2 60 Dy50 Dy40
G30-2 960 5 1.2 3 120 Dy50 Dy40
G35-1 960 8 0.6 3 60 Dy65 Dy50
G35-2 960 8 1.2 4 120 Dy65 Dy50
G40-1 960 12 0.6 4 60 Dy80 Dy65
G40-2 960 12 1.2 5.5 120 Dy80 Dy65
G50-1 960 20 0.6 5.5 60 Dy100 Dy80
G50-2 960 20 1.2 7.5 120 Dy100 Dy80
G60-1 960 30 0.6 11 60 Dy125 Dy100
G60-2 960 30 1.2 15 120 Dy125 Dy100
G70-1 720 45 0.6 11 60 Dy150 Dy125
G70-2 720 45 1.2 18.5 120 Dy150 Dy125
G85-1 720 65 0.6 15 60 Dy150 Dy150
G105-1 500 100 0.6 22 60 Dy200 Dy200
G135-1 400 150 0.6 37 60 Dy200 Dy250

 

 
Shanghai Kuerte Pumps MFG.CO,.LTD all rights reserved 2005